Linux security

From Gender and Tech Resources

Revision as of 18:02, 25 July 2015 by Lilith2 (Talk | contribs)

This page contains some basic security measures specifically for people getting started with linux. Knowing your way around a bit on the kinky linux command-line is required for easily doing these steps. If you run into trouble, find us on IRC.

Setting up root mail

Debian comes with exim installed. If you don't like exim, install postfix (if you install the one, the other is uninstalled).

$ sudo apt-get install postfix

Thunderbird/Icedove

The wizard of Icedove (Thunderbird) does not allow directly for setting up local mail adresses. Choose "I think I'll configure my account later.":

Localmail1.png

Make the menu appear, and choose the big Movemail link (all the way to the right of the blue email):

Localmail2.png

Fill in "Identity" data like so:

Localmail3.png

Outgoing Server Information like so (will be revisited):

Localmail4.png

Your "Account Name":

Localmail5.png

Revisit SMTP settings: Edit > Account Settings -> Outgoing Server (SMTP) -> Edit

Localmail7.png

Set Port 25:

Localmail6.png

If all went well, the account has appeared. You may already have messages for user. Not for root yet.

Open /etc/aliases with your favourite editor (vi, vim, nano, geany):

$ sudo geany /etc/aliases

And make sure there is a root: username, username being *your* username of course. My username is user. :D

Localmail8.png

Managing passwords

Using a password manager allows you to load passwords in your clipboard, making it hard to catch it with a keylogger (just in case). And all good password managers allow you to generate passwords, making the passwords independent from your personal preferences and harder to crack. One of the easiest password managers is a GUI tool called keepassx:

$ sudo apt-get install keepassx

It will appear in your menu. A "first steps" tutorial can be found here http://keepass.info/help/base/firststeps.html

Recommendations:

  • Keep the database on a removable medium like an encrypted USB stick.
  • Use a second encrypted stick to keep a backup of that database on.
  • For added security, set up the database to use a password as well as a keyfile.
  • Try to always close off the application. It uses a lockfile to prevent access by other processes. Quitting the application removes it. If not, and whenever you get a message that you cannot open your database, check on the USB in the directory where the database resides that there isn't a lockfile blocking access. If there is a lockfile while the database is not open for you, just delete the lockfile.
  • On rare occasions a database is truly corrupted. That backup on that other stick, phew. :D

If you want to try your hand at cracking your own (current and new) passwords, try one of these http://sectools.org/tag/pass-audit/

Installing intrusion detection

You can use a firewall, keep your system softwares up to date, stop all unrequired services, use long and difficult passwords and password managers, and more (see below), there is still a chance that some intruder might get into your system.

When intruders penetrate your system there is a great chance that they will want to make their presence as quiet as possible. To do so, they are most likely to replace some common binaries such as ls, netstat or ps with versions that will not make their presence visible. For example, ls can be replaced with an ls version that won't show the files they created, netstat will not show connections that are used by the intruder, and ps will hide processes the intruder runs. To detect changes like that in your system, you can set up intrusion detection with for example aide or tripwire.

Aide and Tripwire are both File Integrity Agents (FIAs). A FIA monitors the integrity and state of the files and objects on your machine. If it detects changes to those files, then it alerts the administrator that an unauthorised access or change has taken place. FIAs usually take a hash of all files to be monitored using an algorithm like MD5. The snapshot is periodically checked against the current hash of the file and any variations alerted on.

One of the key differences between Tripwire and Aide is their commercial status. Tripwire was originally a free, open source product and is now a commercial product but a free version (branched in 2000) is still being developed at http://sourceforge.net/projects/tripwire/. Aide is entirely open source and licensed via the GPL and much, much easier in its configuration. Tripwire offers extended features like signed databases that make it more secure than Aide, but storing aide databases on an encrypted filesystem on another machine (or an external drive) can be considered good enough to not need need tripwire's extended feature(s) and opt for aide instead. Not that you can't sign the databases AND put them on another machine or external drive.

In hostile environments such as server environments, using a FIA makes sense only if it is installed, fully configured and initialised at the very first boot after an installation from scratch, before ever connecting to the internet or doing anything else. It takes only one attack to install a backdoor. Installing aide or tripwire after such an event would guarantee that the backdoor remains just as open as the day an intruder installed it.

aide

To install aide on a debian based system:

$ sudo apt-get install aide

Open up /etc/default/aide with your favourite editor to change who to send its reports to:

$ sudo geany /etc/default/aide

On occasion after a new install when trying a first run, aide complains the /var/lib/aide/aide.db database is missing. Just do:

$ sudo touch /var/lib/aide/aide.db

Most of aide configuration can be found in /etc/aide/aide.conf. This file is pretty well documented and default rules are quite decent.

Aide aims at reporting files that changed since the last snapshot (in /var/lib/aide/aide.db). In hostile environments, a good security measure is to keep that file on a read-only device such as a floppy disk, cdrom or external disk. If you have such a device, you can copy the current snapshot to it and use the snapshot from that device for later runs of aide.

Before making modifications to the configuration file, make a backup first:

$ sudo cp /etc/aide/aide.conf /etc/aide/aide.conf.old 

So let say that you have a copy of aide.db on an external disk. To use that snapshot, you can change database=file:/var/lib/aide/aide.db to database=file:/media/user/drive/aide/aide.db:

tripwire

Installing tripwire on debian based systems:

$ sudo apt-get install tripwire

During install, you will be asked if you wish to set the site and local passphrase. Make ’em good, long, include upper-case and lower-case, numbers and special characters. Preferably store both in a keepassx database (or other password management tool) on an encrypted USB stick (see above).

After install you are notified: The Tripwire binaries are located in /usr/sbin and the database is located in /var/lib/tripwire. It is strongly advised that these locations be stored on write-protected media (e.g. mounted RO floppy). See /usr/share/doc/tripwire/README.Debian for details.

Just after install the tripwire directory /etc/tripwire contains a number of files, two of which are useful for its configuration:

  • twcfg.txt is for general configuration and can easily be the same for all the computers on the same local network. It contains "things" like the location of the tripwire database, instructions for minimising the amount of time the passphrases are kept in memory, and the number of redundant reports.
  • twpol.txt contains the policy that declares all the objects that must be monitored and what to do when one of them is lost or altered. Unlike the configuration file, the policy could (and almost certainly will) vary across the several computers on the same network.

For security reasons (preventing a malicious intruder from spoofing tripwire into giving false "everything is fine" messages) tripwire uses these cleartext files to create binary files for database checking rather than the cleartext files (that are best immediately removed after the deed).

If you make incorrect edits to either of the cleartext files, you will have to restore from backup or tripwire will not be able to create its database. Before making modifications to the configuration files, make a backup first:

$ sudo cp /etc/tripwire/twcfg.txt /etc/tripwire/twcfg.txt.old

and

$ sudo cp /etc/tripwire/twpol.txt /etc/tripwire/twpol.txt.old

Turning camera off

Intruders can gain access to their victims’ computers with remote-access Trojans (RATs) – malware that gives an intruder administrative control over its targeted computers, including, in this case, the ability to remotely control webcams. It’s an invisibly-installed malware program spread via email attachment or by tricking victims into visiting a booby-trapped site.

Tape the camera. It may even be possible to turn it off in BIOS (depending on your version). Better yet, if you know what driver module is controlling the webcam, you can disable the driver with modprobe -r. Check with:

$ lsmod | grep "uvc"

If stuff like this appears, your webcam device uses an uvc driver http://www.ideasonboard.org/uvc/:

uvcvideo               79005  0 
videobuf2_vmalloc      12816  1 uvcvideo
videobuf2_core         47787  1 uvcvideo
videodev              126451  3 uvcvideo,v4l2_common,videobuf2_core
media                  18305  2 uvcvideo,videodev
usbcore               195340  7 uvcvideo,ums_realtek,usb_storage,ehci_hcd,ehci_pci,usbhid,xhci_hcd

To disable the cam:

$ sudo modprobe -r uvcvideo

To enable the cam:

$ sudo modprobe uvcvideo

If not an uvcvideo driver, try $ sudo lsmod | grep "video" and use the modinfo command to find out more about a particular module:

$ sudo modinfo [modulename]

Then replace the "uvcvideo" in the above modprobe command with the name of your driver module.

To disable the webcam at boot (if file not exists, create it):

$ sudo geany /etc/modprobe.d/blacklist.conf

At bottom of the file add this line: blacklist uvcvideo (or the name of your driver instead of "uvcvideo").

Save the file and reboot. Your webcam is no longer functioning.

Turning microphone off

Open the alsa control panel for muting the microphone:

$ sudo alsamixer

You can also use the same modprobe enabling/disabling method as used above for webcam. This page may be helpful for finding your driver module: http://alsa.opensrc.org/ALSA_modules.

Using a firewall

Gufw-mint.png

With a firewall, you can:

  • Log hosts scanning services that aren't running
  • Limit the services that programs can connect to
  • Segregate the local network into trust segments (LAN, DMZ, and Internet)
  • Redirect ports to the hosts providing the service (NAT).

If you have a single machine only the first two would be of interest. These are also the two that are most likely to cause issues for a beginning user.

In mint and ubuntu, a firewall is installed, but is disabled by default. Usually it's better to turn it on. Especially on mobile devices like laptops, which sometimes connect to other networks than your own.

The firewall is called Uncomplicated Firewall (ufw), and can be operated from the terminal (Menu > Accessories > Terminal):

$ sudo ufw enable

Type your password when prompted; this will remain entirely invisible, not even asterisks will show, which is normal. Uncomplicated Firewall (ufw) has a sensible set of default settings (profile), which are fine for the vast majority of home users. So unless you have special wishes: you're done!

You can check the status of the firewall with this command:

$ sudo ufw status verbose

If you wish, you can install a GUI frontend to ufw, called gufw:

$ sudo apt-get install gufw

And it'll be in your menu items (the icon in mint is a brick wall).

Safer browsing

   ...

Encryption

Further hardening of armour

Resources

Related

  • Installing linux
  • Linux applications
  • Kinky linux command-line
  • Object encryption on linux
  • Anonymising your traffic with linux
  • Clean up all the things
  • Shell scripting